Cisco TelePresence MX800 Dual Replacement Manual page 4

Cisco TelePresence MX800 Dual
Contents
Products covered in this guide:
• Cisco TelePresence MX800 Dual
MX800 Dual has three mounting options: free
standing floor stand, floor stand secured to the
wall, and wall mount.
D15327.01 MX800 Dual Replacement Guide, MAY 2015.
Introduction Introduction Grilles and covers
About this guide
This guide describes how to replace spare parts for
MX800 Dual.
The guide describes the steps required to remove
the parts. In order to install the replacement part, you
should follow the same steps in reverse order.
In addition to this Replacement guide, the following
documents are particularly useful when replacing parts.
• Cable schema
• Spare part list
• Installation guide(s)
These documents are available at the Cisco web site.
go to http://www.cisco.com/go/mx-docs
Maintain and Operate Guides or Install and Upgrade
Guides.
Speakers and cameras
Ordering information
To place an order, please contact your local Cisco
representative or Cisco partner and refer to part
numbers as listed in this document.
Cisco Service and Support
Cisco and our partners provide a broad portfolio
of smart, personalized services and support. For
more information about these services, go to:
http://www.cisco.com/go/telepresenceservices
and select
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
4
Replacement Guide
Codec and monitors Appendix