Replace Poe Injector - Cisco TelePresence MX800 Dual Replacement Manual

Cisco TelePresence MX800 Dual
Contents

Replace PoE injector

(page 1 of 2)
Step 1: Remove right side cover
The side cover is fastened with magnets.
Pull out gently and set aside.
Spare part:
• CTS-PWR-AIR-INJ5=
D15327.01 MX800 Dual Replacement Guide, MAY 2015.
Introduction Grilles and covers Speakers and cameras
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
28
Replacement Guide
Codec and monitors Codec and monitors Appendix