Configure Fxo Port On Ht503; Figure 4: Method 1 - Configure Fxs Port On The Ht503 - Grandstream Networks UCM6100 Series Configuration
Hide thumbs
Also See for UCM6100 Series:
- User manual (418 pages) ,
- Manual manual (24 pages) ,
- Cdr and rec api manual (18 pages)
Table of Contents
Advertisement
UCM6100 extension 5000. Please refer to the highlighted settings in the following figure.
In this example, the UCM6100 IP address is 192.168.40.207.
Configure FXO Port on HT503
1. Connect the PSTN line to the HT503 FXO port.
2. On the HT503 web GUI, go to FXO Port setting page, configure to register the FXO port to the
UCM6100 extension 5001. Please refer to the highlighted settings and other necessary settings in the
following figures.
In this example, the UCM6100 IP address is 192.168.40.207.
Firmware Version 1.0.1.25
Figure 4: Method 1 - Configure FXS Port on the HT503
Configuring UCM6100 Series with HT503
Page 7 of 18
Advertisement
Table of Contents
Need help?
Do you have a question about the UCM6100 Series and is the answer not in the manual?