Using The Embedded Web Server - Lexmark MS310d Quick Refence Manual

Primary light sequence

Using the Embedded Web Server

Note: This functionality is available only in network printers or printers connected to print servers.
Use the Embedded Web Server to:
•
Check the status of the printer supplies.
•
Configure supply notifications.
•
Configure printer settings.
• Configure network settings.
• View reports.
To access the Embedded Web Server for your printer:
1
Obtain the printer IP address by printing a network setup page or menu settings page, and then finding the TCP/IP
section.
For more information, see
Notes:
•
An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Open a Web browser, and then type the printer IP address in the address field.
Supplemental light sequence
"Printing a menu settings and network setup page" on page
Message
Memory full
Paper jam, clear
standard bin
Paper jam, remove
standard tray to clear
duplex
Paper jam, open rear
door
Paper jam, remove
standard tray to clear
duplex
Paper jam, open front
door
Paper jam, remove
standard tray
Paper jam, remove
optional tray
Paper jam, manual
feeder
8
9.