Troubleshooting - Yardworks 060-2288-0 Instruction Manual

22
model no. 060-2288-0 | contact us: 1.866.523.5218
PRobLeM
Strings will not
advance when
using the Auto
Feed head.
grass wraps
around
driveshaft
housing and
string head.
Motor falls
to start when
switch trigger is
depressed.
PoSSibLe CAuSe
1. Strings are welded to themselves. 1. Lubricate with silicone spray.
2. not enough string on spool.
3. Strings are worn too short.
4. Strings are tangled on spool.
1. Cutting tall grass at ground level.
1. Power cord is not plugged in or
connection is loose.
2. household circuit breaker is
tripped.
SoLuTion
2. install more string. Refer to String
Replacement earlier in this manual.
3. Pull strings while alternately
pressing down on and releasing
spool retainer.
4. Remove strings from spool and
rewind. Refer to String Replacement
earlier in this manual.
1. Cut tall grass from the top down
to prevent wrapping.
1. Plug in the power cord.
2. Check circuit breaker.