Troubleshooting - Yardworks 267- 4910 Operator's Manual

TROUBLESHOOTING

PROBLEM
Strings will not advance when
using the Auto Feed Head:
Grass wraps around driveshaft
housing and string head
Motor fails to start when
switch trigger is depressed.
POSSIBLE CAUSE
1. Strings are welded to themselves.
2. Not enough string on spool.
3. Strings are worn too short.
4. Strings are tangled on spool.
1. Cutting tall grass at ground level.
1. Power cord is not plugged in or
connection is loose.
2. Household circuit breaker is
tripped.
1. Lubricate with silicone spray.
2. Install more string. Refer to String Replacement
earlier in this manual.
3. Pull strings while alternately pressing down on
and releasing spool retainer.
4. Remove strings from spool and rewind. Refer to
String Replacement earlier in this manual.
1. Cut tall grass from the top down to prevent
wrapping.
1. Plug in the power cord.
2. Check circuit breaker.
14
SOLUTION