Troubleshooting - Yardworks 060-2342-0 Instruction Manual

18
model no. 060-2342-0 | contact us: 1.866.523.5218
The following chart lists problem symptoms, possible causes and corrective action, if your
electric grass trimmer does not operate properly. If these do not identify and correct the
problem, contact your helpline.
Problems
Trimmer fails to operate.
Trimmer runs intermittently.
Excessive vibrations/noise.
Cutting time per battery
charge too low.
Machine does not cut.
Continuous lighting of the
battery charge indicator.
No charging procedure
possible.
Battery charge indicator
does not light up.
Auto feed does not work.
WARNING! Always switch the product off, disconnect it from
!
power supply and let the product cool down before performing
inspection, maintenance and cleaning!
Possible Causes
Battery discharged.
Battery too hot/cold.
Motor is broken.
Internal wiring of machine
damaged.
Motor is broken.
Battery not fully charged.
On/Off switch defective.
Machine defective.
Line spool is not wound well.
Battery has not been used for
long period or only charged for
short term.
Grass too high.
Battery defective.
Line broken.
Battery not fully charged.
Motor is broken (speed is too
low).
Grass entangled around cutting
head.
Battery not (properly) inserted.
Battery contacts contaminated.
Battery defective.
Plug of battery charger not
plugged in (properly).
Socket outlet, mains cable or
battery charger defective.
Cutting line is not wound well.
The line is tangled.
Line is used up.
Corrective Actions
Recharge battery; also see the content
in charger manual.
Allow to cool/warm.
Contact Service Agent.
Contact Service Agent.
Contact Service Agent.
Recharge battery.
Contact Service Agent.
Contact Service Agent.
Rewind the line. See "To fit spool and
line assembly.''
Fully charge battery; also see
the content in charger manual.
Cut in stages.
Replace the battery.
Replace the line.
Recharge battery; also see the content
in charger manual.
Contact Service Agent.
Remove grass.
Properly insert battery into battery
charger.
Clean the battery contacts (e.g. by
inserting and removing the battery
several times) or replace the battery.
Replace the battery.
Insert mains plug (fully) into the socket
outlet.
Check the mains voltage; have
the battery charger checked by an
authorized after-sales service agent.
Manually feed the line, if still can not
feed out, remove the spool out and
rewind the line.
Replace with a new line spool.