General Maintenance; Cleaning; Cutting Line - Yardworks 060-2288-0 Instruction Manual

model no. 060-2288-0 | contact us: 1.866.523.5218

GENERAL MAINTENANCE

Keep your grass trimmer clean and in good repair for maximum performance and service life. before
each use, inspect the switch and cord for damage. Check for damaged, missing, or worn parts.
Check for loose screws, misalignment, moving parts that are jammed, or any other conditions that
may affect the operation. if abnormal vibration or noise occurs, turn off the tool immediately and have
the problem corrected before further use. Do not use the grass trimmer until it is properly repaired
or replaced.

Cleaning

Wipe the outside of the grass trimmer with a dry soft cloth. Do not hose down or wash the grass
trimmer with water. Scrape the guard and spool area to remove dried clippings and mud. brush or
blow dust, debris, and grass clippings out of the air vents. Keep the vents free of obstruction.

Cutting Line

Replace the cutting line only with nylon monofilament line on pre-wound spools. Always wind the
line in the same direction as the arrow on the spool.
use yARDWoRKS 60-2269-6 replacement spools.
! WARNING: Turn off the tool and unplug the extension cord
from the outlet before maintaining the grass trimmer.
! WARNING: To avoid damage or electric shock, do not
use strong solvents or detergents on the plastic housing
or plastic components. Certain household cleaners may
damage the product and may also cause a shock hazard.
21