To Refill The Spool - Yardworks 060-2288-0 Instruction Manual

15
model no. 060-2288-0 | contact us: 1.866.523.5218

To refill the spool

if you are unable to purchase a new pre-wound spool, you may purchase 0.065"(1.65 mm)
nylon monofilament cutting line and refill the spool that was supplied with your grass trimmer.
1. Remove the spool from the trimmer head.
2. Cut a length of cutting line to approximately 20' (6.1 m) long and fold it in half.
3. Loop the "V" end of the cutting line into the small notch on the inner rail of the spool to
anchor the line.
4. Wind the line evenly and tightly in a counter-clockwise direction. Make sure each section of
the spool contains a separate thread.
5. Do not wind the line beyond the edge of the cutting spool.