General Maintenance - Yardworks 060-3014-6 Instruction Manual

model no. 060-3014-6 | contact us: 1.866.523.5218

GeNeRAL MAINTeNANCe

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from
various types of commercial solvents and may be damaged by their use. Use clean cloths to
remove dirt, dust, oil, grease, etc.
!
WARNING: When servicing, use only identical replacement
parts. Use of any other parts may create a hazard or cause
product damage.
!
WARNING: Always wear safety goggles or safety glasses
with side shields that comply with ANSI Z87.1 during
product operation. If operation is dusty, also wear a dust
mask.
!
WARNING: Before inspecting, cleaning, or servicing the
machine, disconnect the plug from power source and
wait for all moving parts to stop. Failure to follow these
instructions can result in serious personal injury or
property damage.
!
WARNING: Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils, etc., come in
contact with plastic parts. Chemicals can damage, weaken,
or destroy plastic which may result in serious personal
injury. Only the parts shown on the parts list are intended
to be repaired or replaced by the customer. All other parts
should be replaced at an authorized service center.
!
WARNING: Blades are sharp, when handling the blade
assembly, wear non-slip, heavy-duty protective gloves. Do
not place your hand or fingers between blades or in any
position where they could get pinched or cut. Never touch
blades or service unit with the power supply connected.
17