Refill The Spool - Yardworks 060-2279-2 Instruction Manual

14
model no. 060-2279-2 | contact us: 1.866.523.5218

REFILL ThE SPOOL

If you are unable to purchase a new pre-wound spool, you may purchase 0.065" (1.65 mm)
nylon monofilament cutting line and refill the spool that was supplied with your grass trimmer.
• Remove the spool from the trimmer head.
• Cut a length of cutting line to approximately 20' (6.1 m) long and fold it in half.
• Loop the "V" end of the cutting line into the small notch on the inner rail of the spool to anchor
the line.
• Wind the line evenly and tightly in a counterclockwise direction. Make sure each section of the
spool contains a separate thread.
• do not wind the line beyond the edge of the cutting spool.