Assembly Instructions - Pit Boss PB K22 71220 Instructions For Use Manual

ASSEMBLY INSTRUCTIONS

IMPORTANT: Remove all packaging before use, but retain the
safety instructions and store them with this product. Ensure
that the lid is closed prior to assembly.
STEP 1
Attach the four pre-threaded castor wheels (2 & 3)
to each of the four brackets (1) by hand-tightening
them into the hole.
3
1
STEP 2
To assemble the cart, attach the two crosspieces
(4) to one of the four brackets (1). Secure the
brackets (1) to the crosspieces (4) by using the
16x bolts, washers, locking washers, and nuts (A-
D). Please note the position shown in the diagram.
4
1
D
A+B+C
STEP 3
Continue to attach the crosspieces (4) into the
other three brackets (1).
STEP 4
Make sure the cart is secure, and all of the bolts
are tight before placing the Kamado Grill (9) into
it. Press down on the castor levers (2) to lock the
castor wheels to ensure the Kamado cannot move.
STEP 5
To place the Kamado Grill (9) on the cart, first
remove all of the items that are inside of the grill to
make lifting easier. Place one of your hands in the
bottom vent of the Kamado and the other under
the grill.
CAUTION: Use a minimum of two people when
lifting the Kamado Grill onto the cart. Lifting by
the hinge or the side tables could result in injury
and damage to the product.
STEP 6
Place the Kamado Grill on the cart with the bottom
vent facing to the front of the cart allowing the vent
to open and close without any interruption.
9
STEP 7
Once grill is securely seated in the cart, attach
the top vent (10). Align the side notch with the
thermometer at the front, and set over the top
opening. Secure with pre-attached bolt and nut.
10
9
ASSEMBLY INSTRUCTIONS | 4