Matrox RT.X2 User Manual page 107

• Additional Sources References up to two additional sources that you
identified by applying the Matrox Source Identifier effect.
Source 1 Lets you select the unique ID number that you assigned to the
$
first additional video source.
Lets you select the unique ID number that you assigned to the
Source 2
$
second additional video source.
• Cube Options
Face Edge Softness
$
face edges.
Cube Edge Softness
$
edges of the cube.
Depth Sets the depth of the cube.
$
Highlight Color
$
Highlight Intensity
$
Shadow Color
$
Shadow Intensity
$
Sets all six cube faces to display a predetermined RGB color
RGB Cube
$
(front=red, back=green, left=blue, right=yellow, top=cyan, bottom=violet).
Since color shows highlight and shadow better than video, this option is
useful for viewing the results when you adjust the highlight and shadow
settings.
Show Light Direction
$
visual representation of the light direction that you can use as a viewing aid
while adjusting the light rotation. The arrow is white when the light is
directed away from you, and gets progressively darker as the light direction
rotates towards you. Make sure you clear this option before exporting your
final project.
X Light Rotation
$
Y Light Rotation
$
Z Light Rotation
$
• Cube Faces (Front, Back, Left, Right, Top, Bottom) All six cube faces
share the following settings:
Cube Face Source
$
color, the primary source that the cube effect is applied on, or one of the
two extra sources as selected under Additional Sources .
Crop Allows you to crop the edges of your source clip. For more
$
information, see
available only when the corresponding face is set to display a video source.
Sets the amount of softness to apply to the cube
Sets the amount of softness to apply to the outside
Sets the color that is used for highlights.
Sets the brightness of the highlight .
Sets the color that is used for shadows.
Sets the darkness of the shadow.
Displays a three-dimensional arrow that gives a
Rotates the light along the x axis.
Rotates the light along the y axis.
Rotates the light along the z axis.
Sets whether the corresponding cube face displays a
"Cropping your clip" on page 55. The crop settings are
Creating a cube effect
99