Paper Tray 2 - Xerox Phaser 3310 User Manual

Paper Tray 2

You can increase the paper handling
capacity of your printer by installing the
optional Tray 2. The optional paper tray
consists of two components; the support
unit and paper tray.
Note:
Be sure you check the label before
using the optional Tray 2. (For use
with Phaser 3310 only)
1
Turn off the printer and unplug all cables
from the printer.
2
Observe the location of the support
unit's connector and tabs.
3
Align the printer with the support unit
and lower it into place on the tabs and
connector.
4
Load paper in Tray 2. For information on
loading paper in the tray, see
tap
connector
next page.
Label
tap
support unit
paper tray
F.7
P O
RINTER PTIONS