Using Ps Driver - Xerox Phaser 3310 User Manual

Using PS Driver

If you want to use the PS driver which were installed on your Macintosh computer, you must
install the PPD file to access your printer features and allow the computer to communicate with
your printer.
PPD file installation method is different for USB connection and the network connection.
Installing PPD file on the USB-connected Macintosh
Note: The position of Desktop
Printer Utility may vary
depending to the MAC OS.
1
Follow the instruction as described on
the PPD file on your computer.
2
Open the Macintosh HD and double-click Application.
3
Double-click Utilities.
4
Double-click Desktop Printer Utility.
5
Select LaserWriter 8, and select Printer (USB) in the list
box. Then click OK.
6
Click the Change button in the USB Printer Selection
section. The name of your printer appears in the list.
7
Click Phaser 3310, then click OK.
8
Click the Auto Setup button in the PostScript Printer
Description (PPD) File section.
If Auto Setup does not work properly, click Select PPD and
choose Xerox Phaser 3310.
9
When the setup is completed, click the Create button.
10
Click the Save button to save Phaser 3310 as a desktop
printer.
page B.4
U Y P
SING OUR RINTER WITH A
to install
B.11
M
ACINTOSH