Eccentric Adjustment
setup Overview
The 303 DH has the ability to change the geometry of the bike via the eccentric mount.
The geometry can be adjusted from a 64 degree head angle / 14 inch bottom bracket height through a 66
degree head angle / 15 inch bottom bracket height.
eccentric adjustment Slightly loosen the eccentric pinch bolts
1
located at the top of the push link with a 5mm allen key. The bolts
only need to be loose enough to spin the eccentric inserts.
eccentric adjustment Place a 5mm allen key into each eccentric
2
insert as shown. Rotate the eccentric to the desired position. The
eccentric adjustment has a range of 64˚ / 13.85"– 65˚ / 14.35".
eccentric adjustment Once the eccentric mount is in the
3
preferred position secure the pinch bolts.
Torque 65-70 in-lbs
setup ECCENTRIC
16