Connecting The Bx620 S4 Server Blade - Fujitsu PRIMERGY BX620 S4 Operating Manual

Installing the Hardware
4.4

Connecting the BX620 S4 Server Blade

All the connections required for operating the BX620 S4 Server Blade are made
via the midplane of the basic unit. When you install the server blade in the blade
server chassis, connections to the following modules on the back of the basic
unit are made automatically by means of plug connectors:
– Power supply units
– Management blade(s) for server administration
– KVM blade for connecting a monitor, keyboard and mouse
– Ethernet switch blade(s) and/or pass-thru blades for connecting to the LAN
– Fibre channel switch blades or pass-thru blades for connection to a SAN
(optional, requires installation of an FC daughter card in the server blade,
see Options Guide)
BX620 S4
Connecting the BX620 S2 Server Blade
Operating Manual 35