Fujitsu PRIMERGY BX620 S4 Operating Manual page 34

Installing the BX620 S3 Server Blade
Figure 5: Final engaging of the locking mechanism
Removing the BX620 S4 Server Blade
Remove the server blade in the same way as the dummy module (see
"Removing the Dummy Module" on page
V
ATTENTION!
If a server blade has been removed and no new blade is installed in its
place, you must install a dummy module in the empty slot.
34
Ê Press the locking handles inward
until the locking mechanism
engages fully.
31).
Operating Manual
Installing the Hardware
BX620 S4