Hot-Plug Components; Hard Disk Drives - Fujitsu PRIMERGY BX620 S4 Operating Manual

8

Hot-Plug Components

This chapter describes how to replace or add hot-plug components in your
BX620 S4 Server Blade while the system is running.
V
ATTENTION
Only hard disk modules can be added or replaced while the system is
running. For all other system components, the server blade must be
switched off and in most cases must also be removed from the basic unit
(except when installing a storage module) so that the cover can be
opened. For a detailed description of the required procedure see the
Options Guide or the Service Supplement.
8.1

Hard Disk Drives

You can install up to two hot-pluggable 2.5 inch SAS or SATA hard disk modules
in a BX620 S4 Server Blade. Defective hard disk modules can also be replaced
while the system is running.
V
Attention
A mixed configuration of SAS and SATA hard disk modules is not
possible.
As a rule, the two disks are mirrored in a RAID-1 configuration to save the data
fault-tolerantly.
BX620 S4
Operating Manual 65