Fujitsu PRIMERGY BX620 S4 Operating Manual page 33

Installing the Hardware
A
Figure 4: Inserting the server blade
BX620 S4
2
1
1
2
Operating Manual
Installing the BX620 S3 Server Blade
Ê Undo the locking mechanism of the
handles of the server blade by first
pressing the green inside touch
points of the two handles (1) at the
same time.
Ê Then turn the locking handles
outward (2) into the unlocked
position.
Ê Hold the locking handles in the
unlocked position and push the
server blade as far as possible into
the slot.
I
Make sure you install the server
blade in the correct direction.
The control panel (A) must be at
the top.
33