Unpacking The Server Blade; Installing The Server Blade In The Basic Unit - Fujitsu PRIMERGY BX620 S4 Operating Manual

Installing the BX620 S3 Server Blade
4.2

Unpacking the Server Blade

V
ATTENTION!
Make sure you observe the safety notes in the
mation" on page 19
Unpack the server blade only at the place where you want to set it up.
Keep the original packaging of the server blade. You may need it for future
transport.
Ê Transporting the server blade to the desired installation location.
Ê Unpack all the individual parts.
Ê Check the delivery for damage sustained during transport.
Ê Check that the delivery corresponds to the specifications in the delivery
note.
The type label is located at the front right on the underside of the server blade.
If the delivery is damaged or does not match the delivery note, contact your
supplier immediately!
Ê Notify your supplier immediately if you discover any transport damage or if
the packaging content does not match the delivery note.
4.3

Installing the Server Blade in the Basic Unit

The BX620 S4 Server Blade occupies one slot in the basic unit. Up to ten server
blades can be installed in a basic unit. You can also combine and operate
different server blade models in a basic unit. For more information on the
possible configurations see the basic unit operating manual (see
cations" on page
V
ATTENTION!
Make sure you observe the safety notes and the information on
handling electrostatic-sensitive devices in the
Safety" on page
PRIMERGY BX620 S4 server blades are not for use in slots 4 an 10
of the PRIMERGY BX600 S2 basic unit.
30
starting on
75).
19.
Operating Manual
chapter "Important Infor-
page 19.
Installing the Hardware
"Related Publi-
section "Notes on
BX620 S4