Fujitsu PRIMERGY BX620 S4 Operating Manual page 55

BIOS Setup
Password Check
Defines whether a password must be entered when the system is
started. When the BIOS Setup is called up, a password is always
requested if one has been defined. You can enter either the supervisor
password or the user password (if defined).
Setup A password is requested when you call up the BIOS Setup.
Always
A password is requested when you start the system and when you
call up the BIOS Setup.
Supervisor Password Lock
Defines whether the keyboard is locked during the installation of adapter
cards (Enabled or not (Disabled).
I
If there is a supervisor password but no user password has been defined
or an existing user password has been deleted and
– Password Check is set to Setup, you can only access the BIOS Setup
as a supervisor.
– Password Check is set to Always, you can only start the system as a
supervisor.
If there is a user password but no supervisor password has been defined,
you can only access the BIOS Setup with the user password. To enable
full write access, you must delete the user password. Then you should
define a supervisor password for security reasons, because, if there is no
password defined, any user can start the system and write-access the
BIOS Setup.
BX620 S4
Operating Manual
Security menu
55