Attaching The Camera To The Pendant Mount - D-Link DCS-6315 User Manual

Section 2: Assembly and Installation

Attaching the Camera to the Pendant Mount

Step 1
The mounting plate that you removed from the lower part
Bracket Cap
of the camera housing must be attached to the bracket cap,
using the three screws as shown in the diagram.
Step 2
Mounting Plate
Use the included Alignment Sticker for marking the mounting
holes on the ceiling. Drill the corresponding holes. For more
details, see "Deploying the Camera" on page 13.
Step 3
Place the rubber seal onto the mounting part of the pendant
Rubber Seal
bracket. Securely mount the rubber seal and pendant bracket
to the ceiling.
Pendant Bracket
Step 4
Attach the bracket cap, by screwing it onto the pendant
bracket.
Bracket Cap
D-Link DCS-6315 User Manual 18