D-Link DCS-6315 User Manual page 30

Section 3: Configuration
Digital Input
This indicator will change color when a digital input signal is
Indicator detected.
Motion Trigger This indicator will change color when a trigger event occurs.
Indicator Note: The video motion feature must be enabled.
Recording This indicator will change color when a recording is in progress.
Indicator
Control Pad This control pad can be used to electronically Pan, Tilt, and Zoom
(ePTZ) within the camera's predefined view area, if one has been
defined.
Auto Pan This button starts the automatic panning function. The ROI will pan
from back and forth within the FOV (field of view).
Stop
This button stops the camera's ePTZ motion.
Preset Path This button starts the camera's motion along the predefined path.
Video Profile 1 Click to select a predefined setting (profile). Refer to
configuration.
Video Profile 2 Click to select an alternate predefined setting (profile). Refer to
page 43 for configuration.
Full Screen Mode Click to enlarge the video stream to full-screen.
Take a Snapshot
Click to record a snapshot of the current image.
Record Video Clip Click to record a video clip, using predefined settings.
Set up Storage Click to select a folder on your computer to save to.
Listen/Stop Click to enable or disable the ability to listen through the built-in
Listening microphone.
Talk/Stop Talking Click to enable or disable the ability to speak through the built-in
speaker.
Start/Stop Digital Click to enable or disable the ability to use the built-in digital in/out
Output port.
D-Link DCS-6315 User Manual
DCS-6315
page 43 for
30