D-Link DCS-6315 User Manual page 54

Section 3: Configuration
You can create and schedule up to three Events.
Event name: Enter a Name for the Event.
Enable this event: Check the box to Enable this event.
Priority: Select the Priority level for this Event. The one
with the higher priority will be executed first.
Delay: Enter the Delay (time in seconds) before checking
for the next event. The delay time is used for both
motion detection and digital input triggers.
Video Motion Click to set the Trigger to Video motion detected
Detection:
during live video monitoring.
Periodic:
Click to trigger an Event at specified intervals, and
enter a value in minutes.
Digital Input: Click to trigger an Event when DI status changes.
System Boot: Click to trigger an Event when the system boots
up.
Network Lost: Click to trigger an Event whenever the network
connection is lost.
Time: Select days of the week the Event should be
performed or click Always for every day, or click
From and specify a time range.
Trigger D/O: Check the box to trigger Digital Output for a
specified number of seconds and enter a value.
Click Save Settings.
D-Link DCS-6315 User Manual
Add Event
DCS-6315
54