Section 3: Configuration
In this section, you may backup, restore and reboot your camera.
Save To Local
Click Save Configuration to save your current
Hard Drive:
camera configuration as a file on your computer.
Load From
Click Choose File to locate a pre-existing
Local Hard
configuration on your local hard drive. Restore the
Drive:
pre-defined settings to your camera by clicking
Load Configuration.
Restore
Click Restore Factory Defaults to reset your
to Factory
camera and restore the factory default settings.
Default:
Note: If you reset to factory default settings, you can
use the Camera Installation Wizard to reconfigure
your DCS-6315. Refer to
page
25.
Reboot Device:
Click Reboot Device to restart your camera.
D-Link DCS-6315 User Manual
System
"Software Installation" on
DCS-6315
63