Mount The Camera - D-Link DCS-2230L Quick Installation Manual

Mount the Camera

Please refer to the steps below to assist you with mounting the camera.
We suggest that you configure the camera before mounting.
1. Place the mounting base where you want
to position the camera and use a pencil to
mark the holes.
2. Depending on the material of the wall or
ceiling, use proper tools to drill two holes or
screws where you marked. If the wall is made
out of concrete, drill the holes first, insert the
plastic anchors and then the screws.
The space between the camera and the screwheads should be 3mm.
3. Place the mounting base over the screw that
is mounted on the wall. Make sure to fit the
screw-heads over the big holes and slide
it downward to lock firmly. Lightly pull the
base forward to make sure that it is locked.
4. Place the base cover on the base and
screw the camera stem clockwise into the
mounting base.
6