Standard Or Mini Pendant Mount - D-Link DCS-6915 Quick Installation Manual

High speed dome network camera

Hide thumbs Also See for DCS-6915:

Table of Contents

Available languages

Standard or Mini Pendant Mount

Follow the steps below to mount the camera enclosure with the pendant mount.

STEP 1

make a cable entry hole on the wall to recess the

cables. alternatively, cables can be threaded

through the cable entry hole on the mounting

plate.

Sponge

STEP 2

to prevent insects from entering the pendant

mount, you may block the cable entry hole with

the supplied sponge in two different ways.

STEP 3

thread the cables through the pendant mount

and affix the pendant mount on the wall with

screws and screw anchors (not supplied).

Sponge

STEP 4

attach the waterproof collar to the pendant

mount.

STEP 5

thread the cables through the cap and affix it

to the pendant mount with the supplied screws

and washers.

STEP 6

Connect the cables to the camera enclosure.

attach the camera enclosure to the mount and

affix it with the supplied bolt.

Note: after threading the cables, please block the cable entry hole with the supplied sponges

to prevent insects from entering the tube.

Table of Contents