Section 2: Assembly and Installation
Attaching the Camera to the Pendant Mount
Step 1
Begin by attaching the mounting plate to the bracket cap
Bracket Cap
using the three screws as shown in the diagram.
Step 2
Mounting Plate
Use the included mounting guide to mark the proper
placement of the mounting holes on the ceiling. Drill the
corresponding holes.
Step 3
Place the rubber seal onto the mounting part of the pendant
Rubber Seal
bracket. Securely mount the rubber seal between the
pendant bracket and the ceiling. If you need more details,
see
"Deploying the Camera" on page
14.
Pendant Bracket
Step 4
Attach the bracket cap by rotating it counterclockwise, in
order to tighten it onto the pendant bracket.
Bracket Cap
D-Link DCS-6314 User Manual
19