Software Installation - D-Link DCS-6315 User Manual

Section 2: Assembly and Installation

Software Installation

Step 1
Insert the Installation CD-ROM into your computer's CD drive
to start the autorun program. This will launch the Camera
Installation Wizard. The Setup Wizard will guide you through
the installation process of configuring your camera.
Note: If the autorun program does not automatically start on
your computer, go to Windows, click Start > Run. In the Run
command box type D:\setup.exe, where D: represents your
CD-ROM drive.
Step 2
You must accept the End User Licence Agreement and follow
the on-screen prompts to install the Camera Installation
Wizard.
Step 3
Select your camera from the list, then click Wizard. If you have
multiple cameras, you can identify them using the MAC ID that
is printed on the label attached to the back of your camera.
D-Link DCS-6315 User Manual 25