ADTRAN NetVanta 7100 Basic Installation And Call Handling page 6

NetVanta 7100 Exercise – Basic Installation and Call Handling
OBTAIN MAC ADDRESS OF IP PHONES
Navigate to the Data / Switch / MAC Forwarding screen.
From this screen, you can see the MAC addresses of connected devices and the physical
ports that they are connected to.
Note the MAC addresses associated with Ethernet ports 0/1 and 0/2.
Write MAC addresses below for use during voice user creation:
ADTRAN IP 712
Polycom SoundPoint IP 601
*
If you do not see eth 0/1 and eth 0/2 in the MAC Forwarding table, complete the
following:
1. Navigate to the Data / Switch / Power over Ethernet screen.
2. Cycle the power of Eth 0/1 and Eth 0/2 from AUTO to OFF.
3. Cycle the power of Eth 0/1 and Eth 0/2 from OFF to AUTO.
4. Return to the Data / Switch / MAC Forwarding screen as shown above and
obtain MAC addresses after phones have booted.
L2-6 NetVanta IP Telephony Course
00:A0:C8:___:___:___
eth 0/1
00:04:F2:___:___:___
eth 0/2
ADTRAN Phone – Eth 0/1
Polycom Phone – Eth 0/2
*