ADTRAN NetVanta 7100 Basic Installation And Call Handling page 19

29. From the "Enable Mode" of the Command Line Interface, enter the debug voice
summary command. View output while placing call below.
IPT# debug voice summary
The symbol represents a call made from your own phone into the NetVanta IP
Telephony Course Auto Attendant.
30. Call your IPT lab site and confirm proper routing on inbound calls.
1-256-665-9214
1. Dial
2. Enter Pass Code for Student Auto Attendant (your 4 digit passcode)
3. Press 1 to place call into your first Analog Trunk
Call is initiated inbound on the first Analog trunk.
4. Hang-up phone after watching debug output.
Debug Voice Summary Sample Output
Q: What was the expected call flow in this example?
______________________________________________________________
NetVanta 7100 Exercise – Basic Installation and Call Handling
NetVanta IP Telephony Course L2-19