ADTRAN NetVanta 7100 Basic Installation And Call Handling page 3

ACCESSING LAB NETVANTA 7100 - COMMAND LINE INTERFACE (CLI)
Log in to www.adtran.com
(www.adtran.com/training/vilt_ipt).
This link is on your CD and in your course information
From the student web page, navigate down to the Virtual Labs section
Wednesday
9am - 3pm(CT)
Lab 2
CLI: Basic Installation and Call Handling
GUI: Basic Installation and Call Handling
Select CLI as shown above for Command Line Interface
1. Press <Enter> on the keyboard and the access prompt should appear.
2. Enter your AOS password to log into the unit.
3. Enter into Enable Mode by typing 'enable' and then using your AOS
password.
* The Password will be provided by your instructor
NetVanta 7100 Exercise – Basic Installation and Call Handling
and then navigate to your student web page
NetVanta IP Telephony Course L2-3