Step 1: Charge Your Rider 20; Step 3: Initial Setup; Step 4: Acquire Satellite Signals - Bryton Rider 20+ User Manual

Step 1: Charge your Rider 20

Connect Rider 20 + to a PC to charge the battery for at least 3 hours.
Unplug the device when it is fully charged.
Step 2: Turn On Rider 20
Press and hold

Step 3: Initial Setup

instructions to complete setup.
1. Select the display language.
2. Select the daylight saving time.
3. Select the unit of measurement.
• Gender
analysis.
5. Read and accept the Safety Agreement.

Step 4: Acquire Satellite Signals

Once the Rider 20 + is turned on, it will automatically search for satellite signals. It may take 30
time use.
The GPS signal icon (
•
6 Getting Started
to turn on the device.
• Height • Weight
/
icon appears on the screen.
+
reset
1 1 1 1
/ /
1
20 +
+
r
p
m