Step 1: Charge Your Rider 100; Step 2: Turn On Rider 100; Step 3: Initial Setup - Bryton Rider 100 User Manual

Step 1: Charge your Rider 100

Connect Rider 100 to a PC to charge the battery for at least 3 hours.
Unplug the device when it is fully charged.
• You may see a white screen when the battery is really low. Keep the device plugged for
several minutes, it will automatically turn-on after battery is properly charged.
• The temperature suitable for charging battery is 0
charging will be terminated and the device will draw power from battery.

Step 2: Turn On Rider 100

Press to turn on the device.

Step 3: Initial Setup

When turning Rider 10
instructions to complete setup.
1. Select the display language.
2. Select the unit of measurement.
NOTE: Only when you choose English for the display language, you will need to select the
unit of measurement. Otherwise, default would be metric unit.
6 Getting Started
o o
C ~ 40 C. Beyond this temperature range,
reset