Bryton Rider 30 - Bike Computer Quick Start Guide
Parts and Controls
- Power / Back
- Press and hold to turn the Rider 30 on or off
- Press to return to the previous page or cancel an operation.
- Start / Stop selection.
- In menu mode, press to enter or confirm a selection.
- In free cycling mode, press to start recording. Press again to stop recording.
- Mode / Up
- Press to switch modes: Meter, Find & Go, Altitude Chart and My Buddy.
- In menu mode, press to move up to scroll through menu options.
- Lap / Down
- In menu mode, press to move down to scroll through menu options.
- While recording, press to start to record a lap.
Reset the Rider 30
To reset the Rider 30, press and release both and at the same time.
Accessories
The Rider comes with the following accessories:
Optional items:
- Speed/Cadence sensor
- Heard rate belt
- Power adapter
- Plug(s)
Status Icons
icon | Description |
Bike in used |
| Bike 1 |
| Bike 2 |
GPS Signal Status |
| No signal (not fixed) |
| Weak signal |
| Strong signal |
Power Status |
| Full battery |
| Half battery |
| Low battery |
| Heart Rate Sensor Active |
| Cadence Sensor Active |
| Speed Sensor Active |
| Log Record in Progress |
| Training mode |
| Free ride mode |
| Navigation mode |
NOTE:
Training Plan and Log Record are displayed only when they are in progress.
Charging the Battery
To charge the battery, connect your Rider 30 to your computer by using USB cable.
Turn on the Device
Press and hold the Power button to turn on the Rider 30 on.
Acquire Satellite Signals
Once the Rider 30 is turned on, it will automatically search for satellite signals. It may take 30 to 60 seconds to acquire signals.
Initial Setup
When turning the Rider 30 on for the first time, the setup wizard appears on screen. Follow the instructions to complete setup.
- Select the display language and time zone.
- Select the unit of measurement.
- Enter your "user profile"
(It is recommended to input the data. The data accuracy - Read and accept the Safety Agreement.
NOTE:
If you want to change the language on the device, change the setting via Bryton Bridge -> My Rider 30 -> Device Language.
Ride your Bike with this Device
- Just ride with free cycling mode or set up a training program through Menu options.
- Press the Mode button to switch modes.
- Select from the available different modes: Meter, Find & Go, Altitude Chart and My Buddy.
- In free cycling, press to start recording log, and press again to stop recording.
Manage the Device Data via Your Computer
- Connect your Rider 30 to your computer by using USB cable.
- Install the Bryton Bridge application. You can download the application at bb.brytonsport.com or the bundled CD that includes in the package.
- Follow the on-screen instructions to transfer data to your computer.
Share Your Experience With Other Bikers
To share your experiences and training result with other bikers around the world, please visit
http://Brytonsport.com.
Switching Modes
Mount to the Bike
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Bryton Rider 30 - Bike Computer Quick Start Guide
Need Assistance?
Do you have a question about the Rider 30 that isn't answered in the manual? Leave your question here.