The Gardia R300 And The Bryton Rider Series; Pairing The Gardia Device With Your Rider Series - Bryton GARDIA R300 User Manual

The Gardia R300 and the Bryton Rider Series

The Gardia R300 device can be controlled remotely and have settings modified using a
compatible Bryton Rider-series bike computer. This section will provide detailed instructions
for Gardia R300 usage with the Rider S500 and Rider S800 devices. Other compatible
Bryton Rider-series devices will contain similar settings and controls.

Pairing the Gardia Device With Your Rider Series

After initial pairing, the Gardia R300 will be automatically connected with your Bryton Rider-
series bike computer when you start your ride and the Gardia R300 is powered on and within
range.
Radar
Status
Name
BATTERY
REMAINING HOUR
Sensor Details
Remove Remove Remove
Light
Status
My Lights
Rear Light
Front Light
Back to Top
23478
65%
16 hours
23478
12039
1. Ensure that the Bryton Rider device is within
range of your Gardia R300 (3m).
Note:
To avoid interference, ensure you are 10 m away from other
ANT+ sensors when pairing.
2. Turn on the Rider-series device.
3. Select Settings > My Sensors > + >
Radar or Light
4. Select the detected Gardia device.
5. If your Gardia R300 has been successfully
paired with your Rider-series device, the status
and other information of both the radar and
light will be displayed.
Note:
Only compatible Rider-series devices, such as the Rider
RS500 / Rider RS800 / Rider 750 / Rider 420 can be
paired with the Gardia R300 and display radar-related
data.
12 The Gardia R300 and the Bryton Rider Series