Step 1: Charge Your Rider One; Step 2: Turn On Rider One; Step 3: Initial Setup - Bryton RIDER ONE User Manual

Step 1: Charge your Rider one

Connect Rider one to a PC to charge the battery for at least 4 hours.
Unplug the device when it is fully charged.
• You may see battery icon is blinking when the battery is really low. Keep the device plugged until
it is properly charged.
• The temperature suitable for charging battery is 0
charging will be terminated and the device will draw power from battery.

Step 2: Turn On Rider one

Press to turn on the device.

Step 3: Initial Setup

When turning Rider one
instructions to complete setup.
1. Press to select the unit of measurement.
PC
o o
C ~ 40 C. Beyond this temperature range,
At least 4 Hours
the
6 Getting Started