Removing And Adding Ni Modules; Eliminating Electrostatic Discharge (Esd); Caution: Equipment Damage Hazard - Alcatel-Lucent OmniSwitch 10K User Manual

Removing and Adding NI Modules

Removing and Adding NI Modules

Eliminating Electrostatic Discharge (ESD)

Before handling modules, be sure to follow proper procedures to eliminate electrostatic discharge (ESD)
from your person and the surrounding area before installing chassis components.

Caution: Equipment Damage Hazard

When removing modules from the chassis, use one hand to support the rear of the module as shown.
Failure to support the rear of the module may cause it to fall and strike the backplane connectors, resulting
in permanent damage to the module.
page 4-12
X
Proper Module Support
OmniSwitch 10K Hardware Users Guide
Network Interface (NI) Modules
August 2015