Managing Cmm Modules; Reloading A Cmm Module; Reloading The Primary Cmm; Reloading The Secondary Cmm - Alcatel-Lucent OmniSwitch 10K User Manual

Chassis Management and Fabric Modules

Managing CMM Modules

Refer to the "Managing CMM Directory Content" chapter in the Switch Management Guide for detailed
information on managing CMM modules.

Reloading a CMM Module

You can reload either the primary or secondary CMM module using the CLI's
information on using this command, refer to the "Managing CMM Directory Content" chapter in the
Switch Management Guide. A CMM reload is essentially a soft boot of the module. Note that you can
reload only one CMM module at a time; the primary and secondary CMMs cannot be reloaded
simultaneously.

Reloading the Primary CMM

If the primary CMM is reloaded, the secondary CMM automatically takes over primary management
functions. In other words, the secondary CMM becomes the primary CMM as soon as the reload is
initiated. The reloaded CMM then assumes the secondary—or redundant—role when the reload sequence
is complete.

Reloading the Secondary CMM

If the secondary CMM is reloaded, only the secondary CMM is affected. The primary CMM continues all
operations without interruption.
OmniSwitch 10K Hardware Users Guide August 2015
Managing CMM Modules
reload command. For
page 3-11