Installing CMM and CFM Modules
Once the notches have grasped the rail, use your thumbs to press both extractor levers inward
3
simultaneously until the module is firmly seated. (The bottom lever should overlap the top lever.)
Caution. In order to avoid personal injury caused by pinch hazard, be sure to keep hands and fingers clear
of the area between the extractor levers as they close.
Caution: Pinch Point Hazard
To avoid personal injury, use thumbs to depress both extractor levers and keep hands and fingers
clear of area between levers when installing.
page 3-6
Chassis Management and Fabric Modules
OmniSwitch 10K Hardware Users Guide
August 2015