Watchbp Home S - Microlife WatchBP Home S Instruction Manual

4) Automated triple measurement– The WatchBP
Home S automatically takes three consecutive
measurements at 15 second intervals. Because blood
pressure constantly fluctuates, a result determined in
this way is more reliable than one produced by a single
measurement. During the measurement do not move,
cross your legs, or tense your arm muscles. Breath
normally and do not talk.
15 sec.
* The last three measurements will be saved for future
review. Please refer to page 11 "viewing measurements".
1 2
3
15 sec.
15 sec.
5) Finishing the measurement– Once the three readings
are complete, the measured data is automatically
averaged and displayed.
6) Storing measurement data- WatchBP Home S
automatically stores the average of the 3 consecutive
measurements, along with the date and time. A
total of 30 average measurements can be stored.
When memory is full, each new measurement will
automatically overwrite the earliest measurement.
* If one of the individual measurements was questionable, a
fourth one would automatically be taken.
* If the start/stop button is pressed during countdown it
will start measuring immediately; if the start/stop button
is pressed during measurement it will terminate the
measurement; the reading or average readings from the
measurements are displayed.
8 EN