Batteries And Power Adaptor - Microlife WatchBP Home S Instruction Manual

Batteries and power adaptor

Battery indicator
When the batteries have ¼ power
supply left, the Battery Symbol will
flash each time the device is switched
on. Replace with new batteries when
battery indicator appears.
Replacing new batteries
When the batteries need to be replaced, the Battery
Symbol will flash each time the device is switched on.
1) Open the battery compartment at the back of the
device.
2) Replace the batteries – ensure correct polarity as
shown by the symbols in the compartment.
Use 4 new, long-life 1.5V, size AA batteries.
*
* Do not use batteries beyond their date of expiry.
Remove batteries, if the device will not be used for a
*
prolonged period.
Using a power adaptor
The WatchBP Home S device can also be operated using
a Microlife power adaptor (DC 6V, 600mA).
Only use Microlife branded power adaptors.
*
1) Plug the adaptor cable into the Power Plug in the
WatchBP Home S device.
2) Plug the adaptor plug into the wall socket. When
the power adaptor is connected, no battery power is
consumed.
12 EN