Activating The Device - Microlife WatchBP Home S Instruction Manual

Before using WatchBP Home S for the first time

Activating the Device

Pull out the protective strip from the battery
compartment.
Setting Up your Meter
1) Set the year – Upon removing the protective strip or
installing new batteries, the year number flashes in
the display. Use the M button to select the year. Press
the ON/OFF button to confirm your selection.
5
2) Set the month – Use the M button to set the month.
Press the ON/OFF Button to confirm.
3) Set the day – Press the M button to set the day.
Press the ON/OFF Button to confirm.
Press ON/OFF button to confirm
Press M button to make selection