Technical Specifications - Opticon M-10 Specification Manual

9. Technical Specifications

Code reading is performed by positioning the aiming light over the center of a code. The conditions for
technical specifications are as follows, unless otherwise specified in each section.
<Conditions>
Temperature and humidity
Ambient light
Pitch angle
Skew angle
Tilt angle
Curvature
Power supply voltage
PCS (1D and 2D)
Reading test
Barcode test sample (1D and 2D)
<Barcode test sample>
1D codes
GS1 Databar, stacked codes, 2D codes
: Room temperature and room humidity
: 100 ~200 lx (on the surface of a barcode)
: α= 0°
: β = 15°
: γ = 0°
: R = ∞
: 3.3 and 5.0 V
: 0.9 or higher
: 1 read in 2 seconds or less. Accept the performance
with 90% or more success rate for 10 readings.
: Specified below
OPTOELECTRONICS test samples
Labels printed by a dedicated printer for barcode
13
M-10
Specifications Manual