Introduction - Heatrae Sadia ELECTROMAX SOLAR Installation & Servicing Instructions Manual

1.0 INTRODUCTION

Thank you for purchasing a Heatrae Sadia Electromax Solar. The Electromax Solar is
manufactured in the UK to the highest standards and has been designed to meet all the latest
relevant safety specifications.
1.1 IMPORTANT POINTS
The Electromax Solar must be installed and commissioned by a competent person. Please read
and understand these instructions before installing the Electromax Solar. Following installation
and commissioning, the operation of the Electromax Solar should be explained to the user and
these instructions left with them for future reference.
The Electromax Solar is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure they do not play with the Electromax Solar.
The Electromax Solar domestic hot water cylinder is of unvented type. Its installation is subject
to Building Regulation G3 (England and Wales), Technical Standard P3 (Scotland) or Building
Regulation P5 (Northern Ireland). Installation must be carried out by a competent person.
Electrical installation must be carried out in accordance with the current IEE Wiring
Regulations.
The Electromax Solar electric heating boiler must be installed into a sealed (pressurised) primary
system. Following installation the primary system should be flushed in accordance with BS 7593
and an inhibitor added.
The Electromax Solar does not contain any substances harmful to health; it does not contain
any asbestos.
3