Heatrae Sadia ELECTROMAX SOLAR Installation & Servicing Instructions Manual page 8

FIGURE 03: ELECTROMAX SOLAR CONTROL PANEL
ELECTRIC BOILER
INDICATORS
1 HOUR
BOOST SWITCH
DOMESTIC HOT
WATER SWITCH
ELECTRIC BOILER
TEMPERATURE
ADJUSTER
FUSES
FRONT COVER
1.3 STORAGE, HANDLING AND UNPACKING
The Electromax Solar is delivered in protective expanded polystyrene packaging with reinforced
corner posts. The assembly is shrInk wrapped in heavy duty polythene. The Electromax Solar
accessory kit is supplied boxed inside the Electromax Solar underneath the top panel. The
packaging must be removed prior to installation. It is recyclable and should be disposed of in
accordance with environmental guidelines.
The Electromax Solar must be stored upright, under cover in dry conditions. It must not be
stacked.
Note the weight of the product and the handling instructions applied to the packaging. If using
a handling device, eg. a sack barrow, to manually move the Electromax Solar, trucking must
be done from the rear to avoid damage to the outer panels.
The Electromax Solar should be lifted and handled by two persons. Hand holds are provided
in the rear panel, in both side panels and in the base panel to aid lifting. Stooping should be
avoided and protective clothing worn when necessary.
Note: Internal packing pieces which protect the central heating expansion vessel in transit
must be removed prior to installation.
8
HOT WATER CENTRAL HEATING
ALARM
HEAT
OFF OFF
CALL
SUPPLY
ON BOOST ON
-
+
S'CON CH'PUMP R'STAT
TEMP
CENTRAL HEATING
PRESSURE GAUGE
SOLAR CONTROLLER
SOLAR
UP
CONTROLLER
LEFT RIGHT
DOWN
SOLAR PRESSURE
GAUGE