Maintenance - England's Stove Works Smartstove 25?SSP01 Installation & Operation Manual

Setting Stove in Automatic Mode
o To set the stove back into automatic mode, press the down arrow and the up arrow button
simultaneously. This will toggle the stove to Automatic Mode.
o While in Automatic Mode, the stove board will display the Set Temperature.
o The control board on this stove allows the user to adjust the heat output and convection
blower speed, turn the unit on and off, and test components for function (more on diagnostic
mode later).
This unit is meant to operate only with door closed. Smoke spillage and an inefficient, lazy
burn will result from attempting to operate the stove with the door open.
In addition, using fuel other than wood pellets can create an unsafe situation and can also
generate excess carbon monoxide. Carbon monoxide is an odorless, colorless gas which can
The use of a carbon monoxide detector is strongly recommended
IMPORTANT! READ AND FOLLOW ALL INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING CLEANING THE UNIT AS SPECIFIED, AND
ENGLAND'S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT, OR DUE TO UNSAFE INSTALLATION OR
be deadly. Be sure to burn only wood pellets.
REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.
USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH ANY QUESTIONS.
CAUTION
20
.