Operating Training Mode - PC-EFTPOS i3070 User Manual

TERMINAL DISPLAY
PURCHASE
CARD EXP
ENTER CCV
4.5 Operating Training Mode
Training mode helps you train new staff members in the operation of the terminal. Training
Mode can be initiated from your POS system whenever the terminal is in a 'ready' state
without affecting live value totals. During Training Mode the terminal will not connect to the
Host but will perform all transactions offline. Transactions performed in Training Mode will
not affect your settlement total.
The screen will display Training Mode once a transaction is initiated.
To operate training mode:
TERMINAL DISPLAY
hh:mm:ss
PURCHASE
PRESENT CARD
**TRAINING MODE**
Process transactions as per procedures in Section 4.0. Receipts will display TRAINING/VOID
on them.
12
i3070 USER GUIDE
$X.XX
MM/YY
MM/YY
READY
LOGO
dd/mm/yy
$X.XX
PROCEDURE
Enter card expiry date and then press "ENTER"
on PIN Pad.
Enter 3 or 4 digits CCV number available on the card
and press "ENTER" on PIN Pad.
When no CCV available on card, press "ENTER" to
continue processing transaction.
PROCEDURE
Set the Training Mode flag on the POS, and initiate a
transaction.
Note: Only financial transactions can be performed
while in training mode. Training mode can also only
be enabled when the terminal is in a ready state and
when there are no reversal or advices pending.
Insert the customer's chip card into the chip card
reader.
Or:
Swipe the customer's card through the card reader.
PROCEDURES