Basic Functions; Converting A Pinpad From Pc-Eftpos Mode To Standalone Mode; Converting An Existing Pinpad From Standalone Mode To Pc-Eftpos Mode - PC-EFTPOS CBA i5100 Reference Manual

Basic Functions

8.
8.1

Converting a PINpad from PC-EFTPOS Mode to Standalone Mode

Standalone Mode
The i5100 supports a simple standalone mode.
The menu system represents the user interface for the terminal. The menu allows the operator to access all of
the terminal functionality without the need for a POS system.
Configure Standalone Mode

Call the CBA Help Desk on 1800 022 966 (you may need to provide a password which is
"Integrated") and ask them to edit the TMS and disable PC-EFTPOS.

Plug the phone line into i5100 terminal.

Open the EFT Client

Change "Host Interface Address" to NPT and then click on Apply

On the i5100 terminal press [Func] and then [9]

Type in your hidden password*

Press [1] Terminal Config

Press [3] PC-EFTPOS Setup

Press [1] Internal Modem

Press [CHQ] for On (For some terminals the [CHQ] button will be the Top Left Yellow button).)

Perform a TMS logon
*To obtain your hidden password, please call either CBA or PC-EFTPOS and have the last 6 digits
of the terminals serial number with you.
8.2

Converting an Existing PINpad from Standalone Mode to PC-EFTPOS Mode

PC-EFTPOS Mode
All the EFTPOS functionality is initiated through the POS, when in PC-EFTPOS mode.

Change terminal into

Call the CBA Help Desk on 1800 022 966 (you may need to provide a password which is
"Integrated") and ask them to edit the TMS and enable PC-EFTPOS.

Check that the parameters that are setup on TMS are as per customers' needs.

Perform a TMS logon
PC-EFTPOS-CBA i5100 Guide
(as per above).
"PC-EFTPOS Mode"
(see above).
Page 14
(see above)
03/07/2008